 |
| Most Common Issues & Their Solutions in Geyser Repair |
If you have a geyser that is not working, there may be a number of possible reasons for it. These include problems with the thermostat, overheating, leaking connectors and valves, and sediments mixing with the water. In this article you will get the idea of basic problems that occur with your geyser and how we can overcome them. Few can be solved at home while for another we need the help of the expert geyser technician to solve the issue.
Problems with the thermostat
A thermostat is a mechanical device that turns the heating element on and off. If you notice that your heater is taking longer to heat water, this can be caused by a broken heating element. The thermostat can also be faulty.
If you've noticed that you've been having problems with your thermostat for a geyser, there are a few things you can try. First, turn off the power at the main electrical panel. You can also check the circuit breaker to see if there's a problem with the circuit. There are also ways to test if your heating element is working properly.
A stuck thermostat is usually caused by a faulty heating element. It may need to be replaced. However, if it's just a loose connection, you can reset the button on your thermostat.
If you've been still experiencing problems with your water heater, you can use a multimeter to test your thermostat. Place the probes on the bottom left and right terminals. Then, connect the leads to the reset button on your thermostat.
Leaking connectors and valves
Having a leaky connector or valve can cause your geyser to stop working. If you find that your water heater is not functioning properly, you should call a professional geyser technician for help.
Sediments mixing with the water
If you have a geyser, you may have noticed that it does not work as well as it used to. Sediments in the water might be causing a problem. The good news is that there are ways to keep it running like new.
There are three main ways in which you can do this. One way is to replace the power outlet socket. You can also use a power extension board, which can be connected to another electrical outlet.
Another possible solution is to have the geyser serviced by an expert local geyser repair company. This is a much easier option. It might even save you money in the long run.
Circuit breaker tripped
Circuit breakers are an important safety feature in your home. They are designed to turn off power when too much current is flowing through the electrical line. In addition to protecting from overheating, it can help prevent a fire. But how do you know if a breaker is failing?
The first step is to examine your wiring and your water heater. Any loose connections or exposed wires can cause a breaker to trip. This can be a symptom of something more serious, so don't try to resolve the issue on your own.
MCB powering your geyser hasn't tripped
Are you wondering what's the best way to check if your geyser is tripping the MCB? Many people overlook the basic functionality of a geyser but there are a few steps you can take to find out.
The simplest solution is to open up the geyser and look inside. It's possible that the heating element is broken, or that there's a buildup of limescale. If this is the case, you'll need to call a geyser repair service near you for a more thorough inspection.
Having a water heater that takes a long time to heat up is a sign of an issue. A broken heating element could be a result of faulty wiring, or of a fading thermostat. Inefficient geysers may also mean a higher electricity bill.
Overheating
If you think your geyser is overheating, you need to have it checked by a good local geyser repair company near you. Overheating can be a serious problem. It can cause fire or other serious issues. There are many reasons why a geyser may overheat. But there are also several things you can do to fix it.
One of the most common causes of overheating is a heating element that is defective. You can either try to adjust the thermostat or replace the heating element. This will allow you to regulate the temperature of the water.
A faulty temperature and pressure relief valve can be the source of your overheating geyser. In addition, this valve can also create a leak.